bell products

Bell 429 Nose and Aft mounts

Meeker Aviation and AirFilm Camera Systems are pleased to announce the newest product, both nose and aft mounts for the Bell 429.

Nose Mount

  • max payload weight 120lbs
  • will accomodate all the popular sensor/cameras/searchlights
  • uses existing aircraft hole patterns
  • easily installed and removed
  • designed to use our family of Dovetails / Quick disconnects / Vibration isolation devices
  • two mounting surfaces, in front and behind landing light

Aft Mount

  • max payload weight 75lbs
  • will accomodate all the popular sensor/cameras/searchlights
  • uses existing aircraft hole patterns
  • low weight / drag
  • designed to use our family of Dovetails / Quick disconnects / Vibration isolation devices
  • can be used with clamshell doors

Both mounts to be FAA and EASA approved


Bell 206A/B/B1 and 206L/L1-4 and 407 Nose camera mount

Meeker Aviation and AirFilm Camera Systems introduce FAA/STC # SR01654LA for Bell 206A/B/B1 and 206L/L1-4 and 407 Nose camera mount, can also be installed on OH-58. Designed and manufactured by AirFilm and sold through Meeker Aviation.

The mounts offer the following distinct features:

  • 130lb payload capacity.
  • Solid billet aluminum, bolt together construction. No welds.
  • Easy to install, uses existing hole patterns. No permanent airframe modifications.
  • Specific camera adaptor plates come standard.
  • Air conditioning compatible
  • Optional light kit for night operations.
  • Optional counter weight assembly.

Aft Belly Universal Mount

Meeker Aviation in co-operation with Aeropacific and C-Tech Industries bring you the following Bell 206/407 series products.

Features exclusive to mount:

  • Rated to carry 55 lbs
  • Highest ground clearance
  • Low drag penalty
  • Widest C/G range
  • Air conditioning compatible
  • Kit contains: All mounting hardware plus upper and lower dovetail blocks
  • Certified for SX-5, SX-16, Nightsun II and various sensor payloads.

Specifications: FAA STC/PMA for installation on: 206A, 206B, 206L series, 407. Compatible on: OH-58/206. Weight: 9.0lb with hardware.


Landing Gear Lift Blocks

Features:

  • Lift blocks installed between fuselage and crosstubes
  • Adds two inches ground clearance
  • Increase ground clearance when operating belly mounted equipment
  • No adverse effect on standard aircraft attitude
  • FAA/PMA Certified
  • Solid billet 7075 T6 aluminium
  • Kit contains: FWD/AFT crosstube liftblocks and all mounting hardware
  • Weight: 8.0lb with hardware

Bell 206 / 206L / 407 Stc'd Quick Release Door Pin

Features:

  • FAA Approved / PMA manufactured quick release door pin alternative to factory bolts
  • Safe, quick removal and installation of aircraft doors
  • Double safety meets FAR 27. 607
  • Stainless steel quick release pins available in two popular head styles
  • Meets, or exceeds, the strength of original factory fasteners
  • Available in 2, 4 or 5 door kits

Bell 206/206L/407 Stc'd belly mount for downlink/sensors

Features:

  • Designed to carry various payloads up to 100lbs, including:
    1. BMS
    2. L3 Skypod
    3. MRC/RF Tech
    4. NSI
    5. Mosaic Mapping Systems
  • Attaches to existing airframe hard points, no airframe modifications required to install.
  • Easily convertible to various payloads by use of optional adaptor plates, including custom applications.
  • Mount constructed of billet aluminum, hard anodized finish provides excellent corrosion protection

Bell Medium Mount for Flir/Nightsun Mount for: UH1/205/210/212/412

Features:

  • Mount installs to existing hard points, no airframe modifications required.
  • Mount can be installed on left or right sides.
  • Installs in approx 5 minutes.
  • Payloads of 100lbs +