Bell 429 Nose and Aft mounts
Meeker Aviation and AirFilm Camera Systems are pleased to announce the newest product, both nose and aft mounts for the Bell 429.  
Nose Mount
- max payload weight 120lbs
- will accomodate all the popular sensor/cameras/searchlights
- uses existing aircraft hole patterns
- easily installed and removed
- designed to use our family of Dovetails / Quick disconnects / Vibration isolation devices
- two mounting surfaces, in front and behind landing light
Aft Mount
- max payload weight 75lbs
- will accomodate all the popular sensor/cameras/searchlights
- uses existing aircraft hole patterns
- low weight / drag
- designed to use our family of Dovetails / Quick disconnects / Vibration isolation devices
- can be used with clamshell doors
Both mounts to be FAA and EASA approved |
Bell 206A/B/B1 and 206L/L1-4 and 407 Nose camera mount
Meeker Aviation and AirFilm Camera Systems introduce FAA/STC # SR01654LA for Bell 206A/B/B1 and 206L/L1-4 and 407 Nose camera mount, can also be installed on OH-58. Designed and manufactured by AirFilm and sold through Meeker Aviation.  
The mounts offer the following distinct features:
- 130lb payload capacity.
- Solid billet aluminum, bolt together construction. No welds.
- Easy to install, uses existing hole patterns. No permanent airframe modifications.
- Specific camera adaptor plates come standard.
- Air conditioning compatible
- Optional light kit for night operations.
- Optional counter weight assembly.
|
Aft Belly Universal Mount
Meeker Aviation in co-operation with Aeropacific and C-Tech Industries bring you the following Bell 206/407 series products.  
Features exclusive to mount:
- Rated to carry 55 lbs
- Highest ground clearance
- Low drag penalty
- Widest C/G range
- Air conditioning compatible
- Kit contains: All mounting hardware plus upper and lower dovetail blocks
- Certified for SX-5, SX-16, Nightsun II and various sensor payloads.
Specifications: FAA STC/PMA for installation on: 206A, 206B, 206L series, 407. Compatible on: OH-58/ 206. Weight: 9.0lb with hardware.  
 
|
Landing Gear Lift Blocks
Features:
- Lift blocks installed between fuselage and crosstubes
- Adds two inches ground clearance
- Increase ground clearance when operating belly mounted equipment
- No adverse effect on standard aircraft attitude
- FAA/PMA Certified
- Solid billet 7075 T6 aluminium
- Kit contains: FWD/AFT crosstube liftblocks and all mounting hardware
- Weight: 8.0lb with hardware
|
Bell 206 / 206L / 407 Stc'd Quick Release Door Pin
 
Features:
- FAA Approved / PMA manufactured quick release door pin alternative to factory bolts
- Safe, quick removal and installation of aircraft doors
- Double safety meets FAR 27. 607
- Stainless steel quick release pins available in two popular head styles
- Meets, or exceeds, the strength of original factory fasteners
- Available in 2, 4 or 5 door kits
|
